From Newsgroup: rec.games.pinball

I am a little confused. The guides say to add a 2 amp slow blow fuse to lug 6 on the small transformer. Add a 3/4 amp to lug 7. The picture seems to show the slow blow on lug 7 and the fast low on lug 6.
--- Synchronet 3.18a-Win32 NewsLink 1.113

From Newsgroup: rec.games.pinball

On Sunday, July 12, 2020 at 11:22:21 AM UTC-4, Mike Tolley wrote:

I am a little confused. The guides say to add a 2 amp slow blow fuse to lug 6 on the small transformer. Add a 3/4 amp to lug 7. The picture seems to show the slow blow on lug 7 and the fast low on lug 6.

It is 3/4 Amp, for the small transformer.

Look at Post #6 on this thread: https://pinside.com/pinball/forum/topic/ycv-gottlieb-buck-rogers-restoration-or-the-infamous-system-1

Good luck.
Yves
--- Synchronet 3.18a-Win32 NewsLink 1.113

From Newsgroup: rec.games.pinball

There are COMPLETE instructions on what to do and how
to install these fuses. what are you confused about?
THE PICTURE? you can read the fuse values or something??
you must have REALLY great eyes!

Do you understand there are about a zillion different
makers of fuses?? And how they handle a 'slow blow'
varies dramatically. Some use a ceramic core with a
wire wound around it. Some use a spring loaded 'mouse trap'.
Some use a resistor. Some use a single wire with a
dot of solder on the center of the fuse wire. Some use
two dots of solder on the center of the fuse wire! some
use sand around the fuse wire. it's endless...

On Sunday, July 12, 2020 at 11:22:21 AM UTC-4, Mike Tolley wrote:

I am a little confused. The guides say to add a 2 amp slow blow fuse to lug 6 on the small transformer. Add a 3/4 amp to lug 7. The picture seems to show the slow blow on lug 7 and the fast low on lug 6.

--- Synchronet 3.18a-Win32 NewsLink 1.113