From Bob Monzo@email@example.com to rec.games.pinball on Thursday, May 21, 2020 08:06:52
From Newsgroup: rec.games.pinball
I added a SPST toggle switch to my Gottlieb World Fair. I wired it in place of the bounce switch. It works fine but when the switch is off, I still read 5-6 volts across the hold relay. Is this just some false ghost voltage or do I have an issue? I replaced the 2 prong plug with a 3 prong, but even if I remove the ground lug from the transformer frame, I still get the same reading. Outlet tests ok.
--- Synchronet 3.17c-Win32 NewsLink 1.112