From Newsgroup: rec.games.pinball

On Saturday, November 12, 2016 at 6:05:07 PM UTC-8, tomw...@myfairpoint.net wrote:

I just took care of my Pin Up, same problem. Ended up being the spring on the O relay was weak, not returning fully up on the yoke. Nice write up. THX

Same here on my High Hand. It was the O relay needing a couple of switches adjusted. No issues with the ball count unit itself. Thanks a ton for the detailed write up. Necropost FTW!
--- Synchronet 3.19a-Win32 NewsLink 1.113