I'm working on a Game Plan Old Coney Island for a friend.
There were LOTS of small issues that I fixed.
A big one was replacing the targets. During that, one
of the switch wires detached and I soldered it back.
Correctly as near as I can tell.
Before that, everything worked, sort of.
Now, the flippers have stopped working AND
SOME of the switches either do not cause any coil to
fire OR cause the wrong coil to fire.
The manual is pitiful - nothing on the switch matrix
and no wire color codes for the switch wires.
Regardless, I found the diagnostic mode for the
coils and displays, but without documentation, I
cannot guess if there's a switch diagnostic mode.
IS THERE a switch diagnostic mode? How do I get
into it? Is it numbered like the coil diagnostic mode?
Any help greatly appreciated!
Sysop: | Gary Ailes |
---|---|
Location: | Pittsburgh, PA |
Users: | 103 |
Nodes: | 5 (0 / 5) |
Uptime: | 111:48:08 |
Calls: | 580 |
Files: | 2,171 |
Messages: | 61,237 |