From Newsgroup: rec.games.pinball

I have a couple of broken latch plates on my reset bank causing some pins to lift immediately on reset, I don't have a part # (manual on order) has anyone dealt with this and knows a part number or possibly has some spares?
--- Synchronet 3.18c-Win32 NewsLink 1.113

From Newsgroup: rec.games.pinball

On Tuesday, June 15, 2021 at 8:33:50 AM UTC-4, pinballtom264 wrote:

I have a couple of broken latch plates on my reset bank causing some pins to lift immediately on reset, I don't have a part # (manual on order) has anyone dealt with this and knows a part number or possibly has some spares?

Can you post a picture of a good one? I have some latch plates from pinball machines, but I don't know if they would fit. I worked on a manniken bowler a few years ago and it was definitely different from pinball.
Pinworks
--- Synchronet 3.18c-Win32 NewsLink 1.113

From Newsgroup: rec.games.pinball

On Thursday, June 17, 2021 at 8:16:38 PM UTC-4, pinw...@bellsouth.net wrote:

On Tuesday, June 15, 2021 at 8:33:50 AM UTC-4, pinballtom264 wrote:

I have a couple of broken latch plates on my reset bank causing some pins to lift immediately on reset, I don't have a part # (manual on order) has anyone dealt with this and knows a part number or possibly has some spares?

Can you post a picture of a good one? I have some latch plates from pinball machines, but I don't know if they would fit. I worked on a manniken bowler a few years ago and it was definitely different from pinball.
Pinworks

Thanks for the response turns out PBR had some under a different part # that work perfect.
--- Synchronet 3.19a-Win32 NewsLink 1.113

From Newsgroup: rec.games.pinball

On Tuesday, June 22, 2021 at 9:56:57 AM UTC-4, pinballtom264 wrote:

On Thursday, June 17, 2021 at 8:16:38 PM UTC-4, pinw...@bellsouth.net wrote:

On Tuesday, June 15, 2021 at 8:33:50 AM UTC-4, pinballtom264 wrote:

I have a couple of broken latch plates on my reset bank causing some pins to lift immediately on reset, I don't have a part # (manual on order) has anyone dealt with this and knows a part number or possibly has some spares?

Can you post a picture of a good one? I have some latch plates from pinball machines, but I don't know if they would fit. I worked on a manniken bowler a few years ago and it was definitely different from pinball.
Pinworks

Thanks for the response turns out PBR had some under a different part # that work perfect.

Please send me the part number. I have a long standing issue with a broken reset plate on a mannikin ball bowler that these may apply to.

Thank you
--- Synchronet 3.19a-Win32 NewsLink 1.113

From Newsgroup: rec.games.pinball

On Wednesday, June 30, 2021 at 11:08:49 AM UTC-4, pinw...@bellsouth.net wrote:

On Tuesday, June 22, 2021 at 9:56:57 AM UTC-4, pinballtom264 wrote:

On Thursday, June 17, 2021 at 8:16:38 PM UTC-4, pinw...@bellsouth.net wrote:

On Tuesday, June 15, 2021 at 8:33:50 AM UTC-4, pinballtom264 wrote:

I have a couple of broken latch plates on my reset bank causing some pins to lift immediately on reset, I don't have a part # (manual on order) has anyone dealt with this and knows a part number or possibly has some spares?

Can you post a picture of a good one? I have some latch plates from pinball machines, but I don't know if they would fit. I worked on a manniken bowler a few years ago and it was definitely different from pinball.
Pinworks

Thanks for the response turns out PBR had some under a different part # that work perfect.

Please send me the part number. I have a long standing issue with a broken reset plate on a mannikin ball bowler that these may apply to.

Thank you

A-261-5
--- Synchronet 3.19a-Win32 NewsLink 1.113

From Newsgroup: rec.games.pinball

On 2021/06/30 12:10 p.m., pinballtom264 wrote:

On Wednesday, June 30, 2021 at 11:08:49 AM UTC-4, pinw...@bellsouth.net wrote:

On Tuesday, June 22, 2021 at 9:56:57 AM UTC-4, pinballtom264 wrote:

On Thursday, June 17, 2021 at 8:16:38 PM UTC-4, pinw...@bellsouth.net wrote:

On Tuesday, June 15, 2021 at 8:33:50 AM UTC-4, pinballtom264 wrote:

I have a couple of broken latch plates on my reset bank causing some pins to lift immediately on reset, I don't have a part # (manual on order) has anyone dealt with this and knows a part number or possibly has some spares?

Can you post a picture of a good one? I have some latch plates from pinball machines, but I don't know if they would fit. I worked on a manniken bowler a few years ago and it was definitely different from pinball.
Pinworks

Thanks for the response turns out PBR had some under a different part # that work perfect.

Please send me the part number. I have a long standing issue with a broken reset plate on a mannikin ball bowler that these may apply to.

Thank you

A-261-5

Anything like these A-261-15s?

https://flippers.com/catalog_oc/armature-p-3763.html?search=261-5

John :-#)#
--
(Please post followups or tech inquiries to the USENET newsgroup)
John's Jukes Ltd.
MOVED to #7 - 3979 Marine Way, Burnaby, BC, Canada V5J 5E3
(604)872-5757 (Pinballs, Jukes, Video Games)
www.flippers.com
"Old pinballers never die, they just flip out."
--- Synchronet 3.19a-Win32 NewsLink 1.113