• Anyone using the factory Gottlieb System 3 test fixture?

    From John Robertson@spam@flippers.com to rec.games.pinball on Saturday, May 29, 2021 15:04:55
    From Newsgroup: rec.games.pinball

    I've run across something twice now - the fixture won't test the MPU
    "TEST" switch reliably and says there is a fault. What I ended up doing
    was add a 2K2 resistor on clips to pull down the pullup resistor for
    that input, and now it seems just fine.

    Anyone else run into this? I am pretty sure the 8255 drver can sink the
    2ma required to make a low input as the TILT and SLAM both work fine,
    and they too need a 2ma sink each to switch.

    John :-#)#
    --
    (Please post followups or tech inquiries to the USENET newsgroup)
    John's Jukes Ltd.
    MOVED to #7 - 3979 Marine Way, Burnaby, BC, Canada V5J 5E3
    (604)872-5757 (Pinballs, Jukes, Video Games)
    www.flippers.com
    "Old pinballers never die, they just flip out."
    --- Synchronet 3.18c-Win32 NewsLink 1.113