From Newsgroup: rec.games.pinball

My Funhouse center backglass solenoid-controlled GI isn’t working.
Connectors good, no fuses blown. Continuity good from back box to J120.
On full GI test I get about 7.9VAC on both orange-white and orange leads. This seems odd, but only because I am comparing this to upper GI where there’s 7.9VAC on green-white, and 1.7VAC on green lead.
Everything else working great on this pin.
DMD Driver board is new Rottendog. Can’t recall if issue was the same with the stock board.
Assistance greatly appreciated.
--- Synchronet 3.18a-Linux NewsLink 1.113