Looking for what is called a leg T...the female threaded metal piece that the leg bolts screw into.
On 2020/10/21 3:03 p.m., smca...@gmail.com wrote:
Looking for what is called a leg T...the female threaded metal piece that the leg bolts screw into.
There are several styles of these Leg Bolt Plates.
Steve has a good variety at The Pinball Resource, and we have them here
in Canada too.
John :-#)#
--
(Please post followups or tech inquiries to the USENET newsgroup)
John's Jukes Ltd.
MOVED to #7 - 3979 Marine Way, Burnaby, BC, Canada V5J 5E3
(604)872-5757 (Pinballs, Jukes, Video Games)
www.flippers.com
"Old pinballers never die, they just flip out."
On Wednesday, October 21, 2020 at 4:28:57 PM UTC-6, John Robertson wrote:
On 2020/10/21 3:03 p.m., smca...@gmail.com wrote:
Looking for what is called a leg T...the female threaded metal piece that the leg bolts screw into.
There are several styles of these Leg Bolt Plates.
Steve has a good variety at The Pinball Resource, and we have them here
in Canada too.
John :-#)#
--Would use an aftermarket one if I can't find an original at a reasonable price.
(Please post followups or tech inquiries to the USENET newsgroup)
John's Jukes Ltd.
MOVED to #7 - 3979 Marine Way, Burnaby, BC, Canada V5J 5E3
(604)872-5757 (Pinballs, Jukes, Video Games)
www.flippers.com
"Old pinballers never die, they just flip out."
On Wednesday, October 21, 2020 at 4:45:00 PM UTC-7, scasten wrote:
On Wednesday, October 21, 2020 at 4:28:57 PM UTC-6, John Robertson
wrote:
On 2020/10/21 3:03 p.m., smca...@gmail.com wrote:Would use an aftermarket one if I can't find an original at a
Looking for what is called a leg T...the female threaded metalThere are several styles of these Leg Bolt Plates.
piece that the leg bolts screw into.
Steve has a good variety at The Pinball Resource, and we have them
here in Canada too.
John :-#)#
--
(Please post followups or tech inquiries to the USENET newsgroup)
John's Jukes Ltd.
MOVED to #7 - 3979 Marine Way, Burnaby, BC, Canada V5J 5E3
(604)872-5757 (Pinballs, Jukes, Video Games)
www.flippers.com
"Old pinballers never die, they just flip out."
reasonable price.
Aftermarket is fine - nobody sees those things. If you call Steve
make sure to call it a t-nut. If you call it the wrong name he will
yell at you. :)
Dan L
Daniel Lejnieks <Dlej@comcast.net> wrote in >news:4728caab-b577-448a-b88c-0dff4dd7181an@googlegroups.com:
On Wednesday, October 21, 2020 at 4:45:00 PM UTC-7, scasten wrote:
On Wednesday, October 21, 2020 at 4:28:57 PM UTC-6, John Robertson
wrote:
On 2020/10/21 3:03 p.m., smca...@gmail.com wrote:Would use an aftermarket one if I can't find an original at a
Looking for what is called a leg T...the female threaded metalThere are several styles of these Leg Bolt Plates.
piece that the leg bolts screw into.
Steve has a good variety at The Pinball Resource, and we have them
here in Canada too.
John :-#)#
--
(Please post followups or tech inquiries to the USENET newsgroup)
John's Jukes Ltd.
MOVED to #7 - 3979 Marine Way, Burnaby, BC, Canada V5J 5E3
(604)872-5757 (Pinballs, Jukes, Video Games)
www.flippers.com
"Old pinballers never die, they just flip out."
reasonable price.
Aftermarket is fine - nobody sees those things. If you call Steve
make sure to call it a t-nut. If you call it the wrong name he will
yell at you. :)
Dan L
Original poster was correct calling them a Leg-Tee
http://www.pbresource.com/legs.html
I would buy new. Threads on an old one are probably worn.
The original Gottlieb ones have very few threads.
Pinball Life calls them Leg Brackets. >https://www.pinballlife.com/leg-brackets.html
As much as I like Pinabll Resouce, I would probably buy the
Product ID: 01-9296 from Pinball Life because of the greater
number of threads.
flippy <rgp_flippy@comcast.net> writes:
Daniel Lejnieks <Dlej@comcast.net> wrote in
news:4728caab-b577-448a-b88c-0dff4dd7181an@googlegroups.com:
On Wednesday, October 21, 2020 at 4:45:00 PM UTC-7, scasten wrote:
On Wednesday, October 21, 2020 at 4:28:57 PM UTC-6, John Robertson
wrote:
On 2020/10/21 3:03 p.m., smca...@gmail.com wrote:Would use an aftermarket one if I can't find an original at a
Looking for what is called a leg T...the female threaded metalThere are several styles of these Leg Bolt Plates.
piece that the leg bolts screw into.
Steve has a good variety at The Pinball Resource, and we have them
here in Canada too.
John :-#)#
--
(Please post followups or tech inquiries to the USENET newsgroup)
John's Jukes Ltd.
MOVED to #7 - 3979 Marine Way, Burnaby, BC, Canada V5J 5E3
(604)872-5757 (Pinballs, Jukes, Video Games)
www.flippers.com
"Old pinballers never die, they just flip out."
reasonable price.
Aftermarket is fine - nobody sees those things. If you call Steve
make sure to call it a t-nut. If you call it the wrong name he will
yell at you. :)
Dan L
Original poster was correct calling them a Leg-Tee
http://www.pbresource.com/legs.html
I would buy new. Threads on an old one are probably worn.
The original Gottlieb ones have very few threads.
Pinball Life calls them Leg Brackets.
https://www.pinballlife.com/leg-brackets.html
As much as I like Pinabll Resouce, I would probably buy the
Product ID: 01-9296 from Pinball Life because of the greater
number of threads.
I'd probably just go the hardware store, buy a strip of
steel flat stock of sufficient gauge & width, cut to length, drill and
tap a couple of holes.
If you have a hacksaw, drill bit and 5/16" (or 3/8") tap.
On 2020/10/22 8:23 a.m., Scott Lurndal wrote:
flippy <rgp_f...@comcast.net> writes:
Daniel Lejnieks <Dl...@comcast.net> wrote in
news:4728caab-b577-448a...@googlegroups.com:
On Wednesday, October 21, 2020 at 4:45:00 PM UTC-7, scasten wrote:
On Wednesday, October 21, 2020 at 4:28:57 PM UTC-6, John Robertson
wrote:
On 2020/10/21 3:03 p.m., smca...@gmail.com wrote:Would use an aftermarket one if I can't find an original at a
Looking for what is called a leg T...the female threaded metalThere are several styles of these Leg Bolt Plates.
piece that the leg bolts screw into.
Steve has a good variety at The Pinball Resource, and we have them >>>>> here in Canada too.
John :-#)#
--
(Please post followups or tech inquiries to the USENET newsgroup) >>>>> John's Jukes Ltd.
MOVED to #7 - 3979 Marine Way, Burnaby, BC, Canada V5J 5E3
(604)872-5757 (Pinballs, Jukes, Video Games)
www.flippers.com
"Old pinballers never die, they just flip out."
reasonable price.
Aftermarket is fine - nobody sees those things. If you call Steve
make sure to call it a t-nut. If you call it the wrong name he will
yell at you. :)
Dan L
Original poster was correct calling them a Leg-Tee
http://www.pbresource.com/legs.html
I would buy new. Threads on an old one are probably worn.
The original Gottlieb ones have very few threads.
Pinball Life calls them Leg Brackets.
https://www.pinballlife.com/leg-brackets.html
As much as I like Pinabll Resouce, I would probably buy the
Product ID: 01-9296 from Pinball Life because of the greater
number of threads.
I'd probably just go the hardware store, buy a strip of
steel flat stock of sufficient gauge & width, cut to length, drill and
tap a couple of holes.
If you have a hacksaw, drill bit and 5/16" (or 3/8") tap.
You would need a pretty thick piece of steel plate to be strong enough
to thread, you want about 1/4 inch minimum of depth.
Alternatively you can get some suitable nuts and simply weld them to
1/8" plate.
vs $5 bucks each, all made up and ready to install...
John :-#)#
--
(Please post followups or tech inquiries to the USENET newsgroup)
John's Jukes Ltd.
MOVED to #7 - 3979 Marine Way, Burnaby, BC, Canada V5J 5E3
(604)872-5757 (Pinballs, Jukes, Video Games)
www.flippers.com
"Old pinballers never die, they just flip out."
On 2020/10/22 8:23 a.m., Scott Lurndal wrote:
I'd probably just go the hardware store, buy a strip of
steel flat stock of sufficient gauge & width, cut to length, drill and
tap a couple of holes.
If you have a hacksaw, drill bit and 5/16" (or 3/8") tap.
You would need a pretty thick piece of steel plate to be strong enough
to thread, you want about 1/4 inch minimum of depth.
vs $5 bucks each, all made up and ready to install...
John Robertson <spam@flippers.com> writes:
On 2020/10/22 8:23 a.m., Scott Lurndal wrote:
I'd probably just go the hardware store, buy a strip of
steel flat stock of sufficient gauge & width, cut to length, drill and
tap a couple of holes.
If you have a hacksaw, drill bit and 5/16" (or 3/8") tap.
You would need a pretty thick piece of steel plate to be strong enough
to thread, you want about 1/4 inch minimum of depth.
3/16" should be fine. Most of the stress on the part will be
perpendicular to the bolt.
vs $5 bucks each, all made up and ready to install...
Ah, but they're fun to make :-)
On 2020/10/23 10:26 a.m., Scott Lurndal wrote:
John Robertson <spam@flippers.com> writes:
On 2020/10/22 8:23 a.m., Scott Lurndal wrote:
I'd probably just go the hardware store, buy a strip of
steel flat stock of sufficient gauge & width, cut to length, drill and >>> tap a couple of holes.
If you have a hacksaw, drill bit and 5/16" (or 3/8") tap.
You would need a pretty thick piece of steel plate to be strong enough
to thread, you want about 1/4 inch minimum of depth.
3/16" should be fine. Most of the stress on the part will be perpendicular to the bolt.
vs $5 bucks each, all made up and ready to install...
Ah, but they're fun to make :-)
A few words - cross-threading, and overtightening - I've replaced an
awful lot of leg plates over the years...
John :-#)#
--
(Please post followups or tech inquiries to the USENET newsgroup)
John's Jukes Ltd.
MOVED to #7 - 3979 Marine Way, Burnaby, BC, Canada V5J 5E3
(604)872-5757 (Pinballs, Jukes, Video Games)
www.flippers.com
"Old pinballers never die, they just flip out."
On Friday, October 23, 2020 at 11:19:48 AM UTC-7, John Robertson wrote:
On 2020/10/23 10:26 a.m., Scott Lurndal wrote:
John Robertson <spam@flippers.com> writes:
On 2020/10/22 8:23 a.m., Scott Lurndal wrote:
I'd probably just go the hardware store, buy a strip of
steel flat stock of sufficient gauge & width, cut to length, drill and >>>>> tap a couple of holes.
If you have a hacksaw, drill bit and 5/16" (or 3/8") tap.
You would need a pretty thick piece of steel plate to be strong enough >>>> to thread, you want about 1/4 inch minimum of depth.
3/16" should be fine. Most of the stress on the part will be
perpendicular to the bolt.
vs $5 bucks each, all made up and ready to install...
Ah, but they're fun to make :-)
A few words - cross-threading, and overtightening - I've replaced an
awful lot of leg plates over the years...
John :-#)#
Don't remind me..I hate when that shit happens..errrrr
Aftermarket is fine - nobody sees those things. If you call Steve
make sure to call it a t-nut. If you call it the wrong name he will
yell at you. :)
Dan LOriginal poster was correct calling them a Leg-Tee
| Sysop: | Gary Ailes |
|---|---|
| Location: | Pittsburgh, PA |
| Users: | 83 |
| Nodes: | 5 (0 / 5) |
| Uptime: | 83:34:25 |
| Calls: | 521 |
| Calls today: | 1 |
| Files: | 2,171 |
| Messages: | 53,692 |