• Moving SBBS logging out of syslog

    From Dumas Walker@VERT/CAPCITY2 to All on Friday, February 16, 2024 08:58:27
    Several years ago I set my BBS up to write the log to syslog. Recently, some shit for brains decided that having syslog was "bad" so now there is no easy way to just load syslog and search it.

    I want to revert back to having Synchronet keeps its own log. How do I do that?

    And, no I am not looking for a lecture on how this way is better.

    Thanks.

    #

    ---
    þ Synchronet þ CAPCITY2 * capcity2.synchro.net * Telnet/SSH:2022/Rlogin/HTTP
  • From Dumas Walker@VERT/CAPCITY2 to All on Friday, February 16, 2024 10:26:31
    Several years ago I set my BBS up to write the log to syslog. Recently, some shit for brains decided that having syslog was "bad" so now there is no easy way to just load syslog and search it.

    I want to revert back to having Synchronet keeps its own log. How do I do that?

    And, no I am not looking for a lecture on how this way is better.

    Thanks.

    Nevermind, I found the answer right after posting. Now, if I take 'syslog' off the command line, and I am not running daemonized, where does the log go? The wiki mentions sbbs.log, but I am not finding that in /var/log or ~/data/logs. Where does it go?

    #

    ---
    þ Synchronet þ CAPCITY2 * capcity2.synchro.net * Telnet/SSH:2022/Rlogin/HTTP
  • From Dan Clough@VERT to Dumas Walker on Friday, February 16, 2024 10:12:00
    Dumas Walker wrote to All <=-

    Several years ago I set my BBS up to write the log to syslog.
    Recently, some shit for brains decided that having syslog was
    "bad" so now there is no easy way to just load syslog and search
    it.

    I want to revert back to having Synchronet keeps its own log.
    How do I do that?

    I am using Slackware Linux, and in my /etc/syslog.conf I've added this
    near the bottom of the file:

    # Synchronet BBS logging - added by Dan C. 2/17/19
    local3.* -/var/log/sbbs.log

    The "3" on the end of the "local" keyword is because I've also changed
    my /sbbs/ctrl/sbbs.ini to have this in the [UNIX] section at the bottom:

    ; Defaults to using the USER facility.
    LogFacility = 3

    The result of these two settings produces my log in /var/log/sbbs.log

    Hope that helps!




    ... HAL 9000 - Dave. Put down those Windows disks. Please, Dave.
    === MultiMail/Linux v0.52
    --- SBBSecho 3.20-Linux
    * Origin: Palantir * palantirbbs.ddns.net * Pensacola, FL * (1:135/115)
    þ Synchronet þ Vertrauen þ Home of Synchronet þ [vert/cvs/bbs].synchro.net
  • From Digital Man@VERT to Dumas Walker on Friday, February 16, 2024 10:44:39
    Re: Re: Moving SBBS logging out of syslog
    By: Dumas Walker to All on Fri Feb 16 2024 10:26 am

    Several years ago I set my BBS up to write the log to syslog. Recently, some shit for brains decided that having syslog was "bad" so now there is no easy way to just load syslog and search it.

    I want to revert back to having Synchronet keeps its own log. How do I do that?

    And, no I am not looking for a lecture on how this way is better.

    Thanks.

    Nevermind, I found the answer right after posting. Now, if I take 'syslog' off the command line, and I am not running daemonized, where does the log go? The wiki mentions sbbs.log, but I am not finding that in /var/log or ~/data/logs. Where does it go?

    It goes to syslog (the daemon/service, not necessarily the file "syslog"). Look at your syslog configuration file to find out which *files* it goes to. Or use something like journalctl (if you have it) to view them based on service. There's also tools like lnav which are nice for viewing logs.
    --
    digital man (rob)

    Synchronet/BBS Terminology Definition #77:
    SSL = Secure Sockets Layer (precursor to TLS)
    Norco, CA WX: 58.9øF, 75.0% humidity, 3 mph SSW wind, 0.00 inches rain/24hrs ---
    þ Synchronet þ Vertrauen þ Home of Synchronet þ [vert/cvs/bbs].synchro.net
  • From nelgin@VERT/EOTLBBS to Dumas Walker on Friday, February 16, 2024 13:19:04
    On Fri, 16 Feb 2024 08:58:27 -0500
    "Dumas Walker" (VERT/CAPCITY2)
    <VERT/CAPCITY2!Dumas.Walker@endofthelinebbs.com> wrote:
    Several years ago I set my BBS up to write the log to syslog.
    Recently, some shit for brains decided that having syslog was "bad"
    so now there is no easy way to just load syslog and search it.

    I want to revert back to having Synchronet keeps its own log. How do
    I do that?

    And, no I am not looking for a lecture on how this way is better.

    Thanks.

    #

    ---
    þ Synchronet þ CAPCITY2 * capcity2.synchro.net *
    Telnet/SSH:2022/Rlogin/HTTP
    FWIW
    $ cat /etc/rsyslog.d/40-synchronet.conf
    if $programname == 'synchronet' then {
    if $msg startswith ' web ' then {
    action(type="omfile" file="/var/log/sbbs/web.sbbs.log"
    fileOwner="bbs" fileGroup="bbs") } else if $msg startswith ' mail '
    then { action(type="omfile" file="/var/log/sbbs/mail.sbbs.log"
    fileOwner="bbs" fileGroup="bbs") } else if $msg startswith ' srvc '
    then { action(type="omfile" file="/var/log/sbbs/service.sbbs.log" fileOwner="bbs" fileGroup="bbs") } else if $msg startswith ' evnt BINK'
    then { action(type="omfile" file="/var/log/sbbs/binkit.sbbs.log" fileOwner="bbs" fileGroup="bbs") } else if $msg startswith ' evnt '
    then { action(type="omfile" file="/var/log/sbbs/event.sbbs.log"
    fileOwner="bbs" fileGroup="bbs") } else if $msg startswith ' term '
    then { action(type="omfile" file="/var/log/sbbs/term.sbbs.log"
    fileOwner="bbs" fileGroup="bbs") } else if $msg startswith ' ftp ' then
    { action(type="omfile" file="/var/log/sbbs/ftp.sbbs.log"
    fileOwner="bbs" fileGroup="bbs") }
    else
    {
    action(type="omfile" file="/var/log/sbbs/sbbs.log" fileOwner="bbs" fileGroup="bbs") }
    stop
    }
    if $programname == 'ircd' then {
    action(type="omfile" file="/var/log/sbbs/ircd.log" fileOwner="bbs" fileGroup="bbs") stop
    }
    I basically get a different file for each service in /var/log/sbbs
    in my systemd file
    #StandardOutput=syslog
    #StandardError=syslog
    SyslogIdentifier=synchronet
    #SyslogFacility=local3
    All the logging stuff is commented out except for SyslogIdentifier.
    sbbs.ini contains
    ; Defaults to using the USER facility.
    LogFacility=3
    ; syslog identity to use (when daemonized)
    LogIdent=synchronet
    Somehow, it all works.
    --
    End Of The Line BBS - Plano, TX
    telnet endofthelinebbs.com 23
    ---
    þ Synchronet þ End Of The Line BBS - endofthelinebbs.com
  • From dragon@VERT/IPTIA to Digital Man on Friday, February 16, 2024 19:47:58
    I'm running Synchronet on Windows. I have most of my other services on
    dozens of machines sending log data to a central Windows syslog server.
    I would LOVE to get Synchronet to do that as well. Possible?

    ---
    ­ Synchronet ­ IPTIA - bbs2.ipingthereforeiam.com:2323
  • From Digital Man@VERT to dragon on Friday, February 16, 2024 18:12:18
    Re: Syslog and Windows
    By: dragon to Digital Man on Fri Feb 16 2024 07:47 pm

    I'm running Synchronet on Windows. I have most of my other services on dozens of machines sending log data to a central Windows syslog server.
    I would LOVE to get Synchronet to do that as well. Possible?

    If you run Synchronet on Windows a NT services, then all the log output goes to the Synchronet Event log:
    https://wiki.synchro.net/monitor:ntsvcs

    I don't have experience with it, but apparently using something like EventReporter, you can forward all Windows event log messages to a syslog server.
    --
    digital man (rob)

    Breaking Bad quote #15:
    Cheer up Gomey, your people still got J. Lo. - Hank Schrader
    Norco, CA WX: 58.6øF, 78.0% humidity, 2 mph W wind, 0.00 inches rain/24hrs
    ---
    þ Synchronet þ Vertrauen þ Home of Synchronet þ [vert/cvs/bbs].synchro.net
  • From Dumas Walker@VERT/CAPCITY2 to DIGITAL MAN on Saturday, February 17, 2024 10:48:00
    It goes to syslog (the daemon/service, not necessarily the file "syslog"). Loo
    at your syslog configuration file to find out which *files* it goes to. Or use
    omething like journalctl (if you have it) to view them based on service. There
    also tools like lnav which are nice for viewing logs.

    I looked into journalctl. It is supposed to show syslog output with the
    option '-u syslog' but it does not. It claims there are "no entries." It
    does not know what 'sbbs' is, presumably because I don't run it daemonized,
    so there are also "no entries."

    To my knowledge, there is no syslog configuration file because rsyslog is
    not installed -- it was replaced with the stupid systemd journaling crap
    which, as I have figured out, doesn't work so good. I actually just
    checked. /etc/rsyslog.d is still there, but its contents are being ignored
    by the broken new replacement.

    It is like a linux dev decided to answer a question that no one asked --
    how can I make it harder for users who are good with cat, grep, head, tail, etc., to check their logs? -- and the predictably dumb answer was journalctl.

    So I don't want synchronet logging going to "syslog" anymore, file or otherwise. Now that I have taken syslog off the command line, where is sbbs logging to? It currently looks like nowhere, so I'd like to fix that if possible.

    If not possible, I will check into reinstalling rsyslog and living with everything (supposedly) being logged twice, which seems like a real PITA.


    * SLMR 2.1a * "For there is no sea, with out the dolphin" -- Oppian

    ---
    þ Synchronet þ CAPCITY2 * capcity2.synchro.net * Telnet/SSH:2022/Rlogin/HTTP
  • From Dumas Walker@VERT/CAPCITY2 to DAN CLOUGH on Saturday, February 17, 2024 10:24:00
    Several years ago I set my BBS up to write the log to syslog.
    Recently, some shit for brains decided that having syslog was
    "bad" so now there is no easy way to just load syslog and search
    it.

    I want to revert back to having Synchronet keeps its own log.
    How do I do that?

    I am using Slackware Linux, and in my /etc/syslog.conf I've added this
    near the bottom of the file:

    Sounds like maybe Slackware Linux, or at least the version you are running,
    has not switched over to systemd? That happened a few debian versions ago.
    With the latest version, they've replaced rsyslog with some systemd journaling. I can learn some new tool(s) to get to the syslog output I
    want, *IF* they worked as documented which they do not here.

    # Synchronet BBS logging - added by Dan C. 2/17/19
    local3.* -/var/log/sbbs.log

    The "3" on the end of the "local" keyword is because I've also changed
    my /sbbs/ctrl/sbbs.ini to have this in the [UNIX] section at the bottom:

    ; Defaults to using the USER facility.
    LogFacility = 3

    The result of these two settings produces my log in /var/log/sbbs.log

    Hope that helps!

    I may have to reinstall rsyslog and live with the syslog output being both written to file and (maybe) journaled (although it does not really appear
    to be like it is supposed to be).


    * SLMR 2.1a * I was a tall person before I used PKZIP...!

    ---
    þ Synchronet þ CAPCITY2 * capcity2.synchro.net * Telnet/SSH:2022/Rlogin/HTTP
  • From Gamgee@VERT/PALANTIR to Dumas Walker on Saturday, February 17, 2024 15:00:00
    Dumas Walker wrote to DAN CLOUGH <=-

    Several years ago I set my BBS up to write the log to syslog.
    Recently, some shit for brains decided that having syslog was
    "bad" so now there is no easy way to just load syslog and search
    it.

    I want to revert back to having Synchronet keeps its own log.
    How do I do that?

    I am using Slackware Linux, and in my /etc/syslog.conf I've added this
    near the bottom of the file:

    Sounds like maybe Slackware Linux, or at least the version you
    are running, has not switched over to systemd? That happened a
    few debian versions ago.

    Yes, Slackware does not, and likely never will, use systemd. That's a
    Good Thing in my opinion. :-)

    With the latest version, they've replaced rsyslog with some
    systemd journaling. I can learn some new tool(s) to get to the
    syslog output I want, *IF* they worked as documented which they
    do not here.

    Yep, I have a Debian box and some other variants and have noticed that
    too. I don't know much about it, but the "journalctl" command may help.

    # Synchronet BBS logging - added by Dan C. 2/17/19
    local3.* -/var/log/sbbs.log

    The "3" on the end of the "local" keyword is because I've also changed
    my /sbbs/ctrl/sbbs.ini to have this in the [UNIX] section at the bottom:

    ; Defaults to using the USER facility.
    LogFacility = 3

    The result of these two settings produces my log in /var/log/sbbs.log

    Hope that helps!

    I may have to reinstall rsyslog and live with the syslog output
    being both written to file and (maybe) journaled (although it
    does not really appear to be like it is supposed to be).

    That's probably an option; don't think it would hurt anything to have two logs, if it allows you to use the tools you prefer. Good luck.


    ... All the easy problems have been solved.
    --- MultiMail/Linux v0.52
    þ Synchronet þ Palantir BBS * palantirbbs.ddns.net * Pensacola, FL
  • From deon@VERT/ALTERANT to Dumas Walker on Sunday, February 18, 2024 09:23:58
    Re: Re: Moving SBBS logging o
    By: Dumas Walker to DIGITAL MAN on Sat Feb 17 2024 10:48 am

    Howdy,

    I looked into journalctl. It is supposed to show syslog output with the option '-u syslog' but it does not. It claims there are "no entries." It does not know what 'sbbs' is, presumably because I don't run it daemonized, so there are also "no entries."

    FWIW, I'm using journalctrl.

    My sbbs.ini has:
    ; Defaults to using the USER facility.
    LogFacility = 1
    ; syslog identity to use (when daemonized)
    LogIdent = synchronet

    And then to see synchronet logs, I use:
    journalctl -f --since "today" -tsynchronet

    I dont recall if I did anything on the systemd side (dont remember), and havent figured out how to use journalctl with any anger - but the command above gets me what I need...


    ...ëîåï

    ---
    þ Synchronet þ AnsiTEX bringing back videotex but with ANSI
  • From nelgin@VERT/EOTLBBS to All on Saturday, February 17, 2024 18:06:03
    On Sat, 17 Feb 2024 15:00:00 -0600
    "Gamgee" (VERT/PALANTIR) <VERT/PALANTIR!Gamgee@endofthelinebbs.com>
    wrote:


    Sounds like maybe Slackware Linux, or at least the version you
    are running, has not switched over to systemd? That happened a
    few debian versions ago.

    Yes, Slackware does not, and likely never will, use systemd. That's
    a Good Thing in my opinion. :-)

    I hated systemd to start with, however having used it for a while now,
    I have found it's extremely powerful.

    For example:

    I am now running each part of sbbs separately, term, services, mail,
    webserver and ftp. Each has their own startup script such as

    sbbs-ftp.service, sbbs-term.service and they are controlled as a group
    by sbbs.service

    So I can start and stop each individually or as a group.

    I do a similar thing with sexpots. I have 4 lines and each one runs via
    an independent systemd file, but can be controlled as a group.

    It's easy to run sbbs as a separate user, and set parameters for the environment that it'll run in.
    --
    End Of The Line BBS - Plano, TX
    telnet endofthelinebbs.com 23
    ---
    þ Synchronet þ End Of The Line BBS - endofthelinebbs.com
  • From Digital Man@VERT to Dumas Walker on Saturday, February 17, 2024 19:54:12
    Re: Re: Moving SBBS logging o
    By: Dumas Walker to DIGITAL MAN on Sat Feb 17 2024 10:48 am

    So I don't want synchronet logging going to "syslog" anymore, file or otherwise. Now that I have taken syslog off the command line, where is sbbs logging to?

    The console. And the traditional BBS sessions are logged to files in the data/logs directory.
    --
    digital man (rob)

    Synchronet "Real Fact" #7:
    The name "Synchronet" was suggested by Steve Deppe (Ille Homine Albe) in 1991 Norco, CA WX: 53.5øF, 82.0% humidity, 7 mph W wind, 0.00 inches rain/24hrs
    ---
    þ Synchronet þ Vertrauen þ Home of Synchronet þ [vert/cvs/bbs].synchro.net
  • From Gamgee@VERT/PALANTIR to nelgin on Sunday, February 18, 2024 12:39:00
    nelgin wrote to All <=-

    Sounds like maybe Slackware Linux, or at least the version you
    are running, has not switched over to systemd? That happened a
    few debian versions ago.

    Yes, Slackware does not, and likely never will, use systemd. That's
    a Good Thing in my opinion. :-)

    I hated systemd to start with, however having used it for a while
    now, I have found it's extremely powerful.

    For example:

    I am now running each part of sbbs separately, term, services,
    mail, webserver and ftp. Each has their own startup script such
    as

    sbbs-ftp.service, sbbs-term.service and they are controlled as a
    group by sbbs.service

    So I can start and stop each individually or as a group.

    I do a similar thing with sexpots. I have 4 lines and each one
    runs via an independent systemd file, but can be controlled as a
    group.

    It's easy to run sbbs as a separate user, and set parameters for
    the environment that it'll run in.

    While it "may" make some things more convenient, any of that stuff can
    be done the "old fashioned way" with scripts, probably in /etc/rc.d ,
    and passing of command-line parameters (like start|stop|restart).



    ... She kept saying I didn't listen to her, or something like that.
    --- MultiMail/Linux v0.52
    þ Synchronet þ Palantir BBS * palantirbbs.ddns.net * Pensacola, FL
  • From Dumas Walker@VERT/CAPCITY2 to GAMGEE on Sunday, February 18, 2024 10:35:00
    Yes, Slackware does not, and likely never will, use systemd. That's a
    Good Thing in my opinion. :-)

    Indeed. I run devuan on a couple of boxes for that reason, but I have
    found it is not real reliable for my use if I need X windows. So it runs
    on cli only machines and in a couple of VMs.

    With the latest version, they've replaced rsyslog with some
    systemd journaling. I can learn some new tool(s) to get to the
    syslog output I want, *IF* they worked as documented which they
    do not here.

    Yep, I have a Debian box and some other variants and have noticed that
    too. I don't know much about it, but the "journalctl" command may help.

    It might except...

    I may have to reinstall rsyslog and live with the syslog output
    being both written to file and (maybe) journaled (although it
    does not really appear to be like it is supposed to be).

    That's probably an option; don't think it would hurt anything to have two logs, if it allows you to use the tools you prefer. Good luck.

    It is not so much that, but journalctl is supposed to be able to show me
    the syslog logging if I give it a '-u syslog' but it reports there are no entries. Oooops! ;)


    * SLMR 2.1a * <A>bort <R>etry <S>hoot the SOB!

    ---
    þ Synchronet þ CAPCITY2 * capcity2.synchro.net * Telnet/SSH:2022/Rlogin/HTTP
  • From Dumas Walker@VERT/CAPCITY2 to DIGITAL MAN on Sunday, February 18, 2024 11:00:00
    The console. And the traditional BBS sessions are logged to files in the data/
    gs directory.

    So it only goes to the console?

    I have seen those logs, they don't hold much info when it comes to non-traditional sessions, like a QWK node uploading REP packets.


    * SLMR 2.1a * We're having an adventure, just like the Goonies!!!

    ---
    þ Synchronet þ CAPCITY2 * capcity2.synchro.net * Telnet/SSH:2022/Rlogin/HTTP
  • From Dumas Walker@VERT/CAPCITY2 to DEON on Sunday, February 18, 2024 10:40:00
    My sbbs.ini has:
    ; Defaults to using the USER facility.
    LogFacility = 1
    ; syslog identity to use (when daemonized)
    LogIdent = synchronet

    And then to see synchronet logs, I use:
    journalctl -f --since "today" -tsynchronet

    I dont recall if I did anything on the systemd side (dont remember), and haven
    figured out how to use journalctl with any anger - but the command above gets
    what I need...

    Are you running synchronet daemonized? I am not, and the sbbs.ini notes
    seem to indicate that this only works when you are, but will try those
    settings and see if I am reading that wrong. Thanks.


    * SLMR 2.1a * Camel: A quarter horse designed by a committee.

    ---
    þ Synchronet þ CAPCITY2 * capcity2.synchro.net * Telnet/SSH:2022/Rlogin/HTTP
  • From Digital Man@VERT to Dumas Walker on Sunday, February 18, 2024 12:42:52
    Re: Re: Moving SBBS logging o
    By: Dumas Walker to DIGITAL MAN on Sun Feb 18 2024 11:00 am

    The console. And the traditional BBS sessions are logged to files in the data/
    gs directory.

    So it only goes to the console?

    Correct.

    I have seen those logs, they don't hold much info when it comes to non-traditional sessions, like a QWK node uploading REP packets.

    That's right.
    --
    digital man (rob)

    Synchronet/BBS Terminology Definition #6:
    BBS = Bulletin Board System
    Norco, CA WX: 63.8øF, 61.0% humidity, 0 mph SSW wind, 0.00 inches rain/24hrs ---
    þ Synchronet þ Vertrauen þ Home of Synchronet þ [vert/cvs/bbs].synchro.net
  • From deon@VERT/ALTERANT to Dumas Walker on Monday, February 19, 2024 09:13:14
    Re: Re: Moving SBBS logging o
    By: Dumas Walker to DEON on Sun Feb 18 2024 10:40 am

    Are you running synchronet daemonized? I am not, and the sbbs.ini notes seem to indicate that this only works when you are, but will try those settings and see if I am reading that wrong. Thanks.

    I am.

    I start my SSBS with "sbbs -d" from a script.


    ...ëîåï

    ---
    þ Synchronet þ AnsiTEX bringing back videotex but with ANSI
  • From Dumas Walker@VERT/CAPCITY2 to DIGITAL MAN on Monday, February 19, 2024 09:12:00
    I have seen those logs, they don't hold much info when it comes to non-traditional sessions, like a QWK node uploading REP packets.

    That's right.

    I installed rsyslog and all is well again.


    * SLMR 2.1a * I still miss my Ex... But my aim _is_ improving!

    ---
    þ Synchronet þ CAPCITY2 * capcity2.synchro.net * Telnet/SSH:2022/Rlogin/HTTP
  • From dragon@VERT/IPTIA to Digital Man on Monday, February 19, 2024 20:03:18
    On 2/16/2024 21:12, Digital Man wrote:
    Re: Syslog and Windows
    By: dragon to Digital Man on Fri Feb 16 2024 07:47 pm

    > I'm running Synchronet on Windows. I have most of my other services on
    > dozens of machines sending log data to a central Windows syslog server.
    > I would LOVE to get Synchronet to do that as well. Possible?

    If you run Synchronet on Windows a NT services, then all the log output goes to the Synchronet Event log:
    https://wiki.synchro.net/monitor:ntsvcs

    I don't have experience with it, but apparently using something like EventReporter, you can forward all Windows event log messages to a syslog server.

    Quite a lot of functionality is lost by running Synchronet as a service.
    I would much prefer to have Synchronet send log entries directly to a
    remote syslog server. If this seems too difficult to implement, I won't
    keep pushing the idea.

    ---
    ­ Synchronet ­ IPTIA - bbs2.ipingthereforeiam.com:2323
  • From Digital Man@VERT to dragon on Monday, February 19, 2024 22:05:33
    Re: Re: Syslog and Windows
    By: dragon to Digital Man on Mon Feb 19 2024 08:03 pm

    On 2/16/2024 21:12, Digital Man wrote:
    Re: Syslog and Windows
    By: dragon to Digital Man on Fri Feb 16 2024 07:47 pm

    > I'm running Synchronet on Windows. I have most of my other services on
    > dozens of machines sending log data to a central Windows syslog server.
    > I would LOVE to get Synchronet to do that as well. Possible?

    If you run Synchronet on Windows a NT services, then all the log output goes to the Synchronet Event log:
    https://wiki.synchro.net/monitor:ntsvcs

    I don't have experience with it, but apparently using something like EventReporter, you can forward all Windows event log messages to a syslog server.

    Quite a lot of functionality is lost by running Synchronet as a service.

    What functionality is that? With the addition of MQTT support in v3.20, I plan to make running Synchronet as an NT service to as natural (and featureful) as it is to run it as a daemon on *nix.

    I would much prefer to have Synchronet send log entries directly to a remote syslog server. If this seems too difficult to implement, I won't keep pushing the idea.

    Nobody's ever made the request before. <shrug>
    --
    digital man (rob)

    Breaking Bad quote #13:
    I got twenty bucks that says he's a beaner. - Hank Schrader
    Norco, CA WX: 53.0øF, 96.0% humidity, 0 mph NW wind, 0.10 inches rain/24hrs
    ---
    þ Synchronet þ Vertrauen þ Home of Synchronet þ [vert/cvs/bbs].synchro.net
  • From MRO@VERT/BBSESINF to Digital Man on Tuesday, February 20, 2024 00:53:09
    Re: Re: Syslog and Windows
    By: Digital Man to dragon on Mon Feb 19 2024 10:05 pm

    I would much prefer to have Synchronet send log entries directly to a remote syslog server. If this seems too difficult to implement, I won't keep pushing the idea.

    Nobody's ever made the request before. <shrug>

    Hey, guy who runs serveral external servers here.

    i don't think it's necessary to be implimented directly into synchronet.
    they can have this functionality via scripting or editing the source code.
    ---
    þ Synchronet þ ::: BBSES.info - free BBS services :::
  • From Dumas Walker@VERT/CAPCITY2 to DRAGON on Tuesday, February 20, 2024 08:52:00
    Quite a lot of functionality is lost by running Synchronet as a service.
    I would much prefer to have Synchronet send log entries directly to a remote syslog server. If this seems too difficult to implement, I won't
    keep pushing the idea.

    Since it sounds like you are talking about windows, this may not be an
    option, but I think that rsyslog gives you the option to send the output to
    a remote syslog server. That should mean that individual software programs don't need to know how to do it on their own.


    * SLMR 2.1a * Avoid reality at all costs.

    ---
    þ Synchronet þ CAPCITY2 * capcity2.synchro.net * Telnet/SSH:2022/Rlogin/HTTP
  • From dragon@VERT/IPTIA to Dumas Walker on Sunday, February 25, 2024 22:49:25
    On 2/20/2024 08:52, Dumas Walker wrote:
    Quite a lot of functionality is lost by running Synchronet as a service.
    I would much prefer to have Synchronet send log entries directly to a
    remote syslog server. If this seems too difficult to implement, I won't
    keep pushing the idea.

    Since it sounds like you are talking about windows, this may not be an option, but I think that rsyslog gives you the option to send the output to
    a remote syslog server. That should mean that individual software programs don't need to know how to do it on their own.


    * SLMR 2.1a * Avoid reality at all costs.

    ---
    ¨ Synchronet ¨ CAPCITY2 * capcity2.synchro.net * Telnet/SSH:2022/Rlogin/HTTP

    I am talking Windows.

    I manage multiple mail, s/ftp, im, firewall, and other servers spread
    out all over the World on a variety of OSes. Most of these are able to
    send messages to a central syslog server.

    There's also an IDS system sending syslog alerts.

    Currently, Synchronet's logs are bundled up by some scripts that forward
    them to syslog. I would like to remove the delay this introduces to
    that to, for instance, update my firewall against hack attempts.

    ---
    ­ Synchronet ­ IPTIA - bbs2.ipingthereforeiam.com:2323
  • From Digital Man@VERT to dragon on Monday, February 26, 2024 13:15:16
    Re: Re: Syslog and Windows
    By: dragon to Dumas Walker on Sun Feb 25 2024 10:49 pm

    On 2/20/2024 08:52, Dumas Walker wrote:
    Quite a lot of functionality is lost by running Synchronet as a service. >> I would much prefer to have Synchronet send log entries directly to a >> remote syslog server. If this seems too difficult to implement, I won't >> keep pushing the idea.

    Since it sounds like you are talking about windows, this may not be an option, but I think that rsyslog gives you the option to send the output to
    a remote syslog server. That should mean that individual software programs don't need to know how to do it on their own.


    * SLMR 2.1a * Avoid reality at all costs.

    ---
    ¨ Synchronet ¨ CAPCITY2 * capcity2.synchro.net * Telnet/SSH:2022/Rlogin/HTTP

    I am talking Windows.

    I manage multiple mail, s/ftp, im, firewall, and other servers spread
    out all over the World on a variety of OSes. Most of these are able to
    send messages to a central syslog server.

    There's also an IDS system sending syslog alerts.

    Currently, Synchronet's logs are bundled up by some scripts that forward them to syslog. I would like to remove the delay this introduces to
    that to, for instance, update my firewall against hack attempts.

    Are you using a Syslog Agent for Windows?

    Do your other Windows applications have built-in syslog support? Are they open source?

    If you know, what format syslog msgs are you/they using: BSD or IETF format?
    --
    digital man (rob)

    Breaking Bad quote #23:
    Whiteboy's gonna kick your ass if you don't stop wasting his time. - Hank Norco, CA WX: 60.9øF, 73.0% humidity, 3 mph SSE wind, 0.01 inches rain/24hrs ---
    þ Synchronet þ Vertrauen þ Home of Synchronet þ [vert/cvs/bbs].synchro.net
  • From dragon@VERT/IPTIA to Digital Man on Monday, February 26, 2024 21:15:06
    On 2/26/2024 16:15, Digital Man wrote:
    Re: Re: Syslog and Windows
    By: dragon to Dumas Walker on Sun Feb 25 2024 10:49 pm

    > On 2/20/2024 08:52, Dumas Walker wrote:
    > >> Quite a lot of functionality is lost by running Synchronet as a service.
    > >> I would much prefer to have Synchronet send log entries directly to a
    > >> remote syslog server. If this seems too difficult to implement, I won't
    > >> keep pushing the idea.
    >
    > > Since it sounds like you are talking about windows, this may not be an
    > > option, but I think that rsyslog gives you the option to send the output
    > > to
    > > a remote syslog server. That should mean that individual software
    > > programs don't need to know how to do it on their own.
    >
    >
    > > * SLMR 2.1a * Avoid reality at all costs.
    >
    > > ---
    > > ¨ Synchronet ¨ CAPCITY2 * capcity2.synchro.net *
    > > Telnet/SSH:2022/Rlogin/HTTP
    >
    > I am talking Windows.
    >
    > I manage multiple mail, s/ftp, im, firewall, and other servers spread
    > out all over the World on a variety of OSes. Most of these are able to
    > send messages to a central syslog server.
    >
    > There's also an IDS system sending syslog alerts.
    >
    > Currently, Synchronet's logs are bundled up by some scripts that forward
    > them to syslog. I would like to remove the delay this introduces to
    > that to, for instance, update my firewall against hack attempts.

    Are you using a Syslog Agent for Windows?

    Do your other Windows applications have built-in syslog support? Are they open source?

    If you know, what format syslog msgs are you/they using: BSD or IETF format?

    Currently I'm using a syslog server my buddy and I wrote in Perl. I've
    used free and commercial Syslog servers for Windows as well. None of
    those were open source, which is what prompted creating our own.

    I have several closed souced commercial Windows applications, as well as numerous Perl applicationes we wrote sending to syslog.

    The Perl syslog server is format agnostic and can deal with IETF or BSD format. I actually run 2 instances, one for each. Only one application currently uses BSD format.

    If you're looking for example code for sending messages, the Perl
    Net::Syslog module has it all and is pretty small.

    ---
    ­ Synchronet ­ IPTIA - bbs2.ipingthereforeiam.com:2323